Rear View Back Up Camera Complete Kit, Fits 2010-2018 Camaro

  

Questions on product fitment or installation? We are happy to help!

See what you've been missing with this complete rear view backup camera and 4.3 LCD display rear view mirror for your Chevy® Camaro. This rear view backup camera system includes a replacement OnStar® rear view mirror for your Camaro with no loss of vehicle features, Super CMOS camera, and all vehicle harnessing. When you put your Camaro in reverse, the replacement rear view mirror displays a bright 4.3 LCD that provides a complete view of everything behind your vehicle, with our Camera Source exclusive camera.

This kit can be installed in 90 - 150 minutes by a professional. A "do-it-yourself" installation is estimated between 120-180 minutes. Premium high definition Super CMOS camera - (Camera Source exclusive).

OnStar® auto dimming video mirror with 4.3 video screen. Super CMOS - The best available and only at Camera Source.

600 TV lines of resolution. Optional custom OE inspired parking guidelines - can be turned off at the harness.

Additional Information: This camera mounts under the lift gate license plate panel in the same place that the factory camera would be mounted. No loss of features in your current mirror or vehicle. Large 4.3 color backup monitor displays vividly when you put your Camaro in reverse.

Order kit 5000-SPCR for convertible or other applications where headliner clearance is tight for the rear view mirror. Limited fit in Convertible Camaro Due to the convertibles increased overhead console size the 4.3 display mirror in this kit has compromised adjustability. Please install mirror and check for rearward visibility before full kit installation on convertible models.

If clearance is tight order kit 5000-SPCR to get additional clearance between the mirror and the headliner. Vehicle Interface : Includes Rearview Mirror. Installation is estimated between 90-150 minutes.

You will install the camera in the panel above the license plate and replace your factory mirror with this replacement. The mirror comes with the necessary harness to retain the OnStar® feature and power/video harness to connect to the factory wiring and camera wiring. You will need to locate a 12 volt accessory power source, reverse power source, and ground for installing the camera and mirror.